Fisher Outside Insulated Anchor DHM 40 FVZ (250 Pieces) 536253 Outside Insulated for Anchor (打込mi Type)

The fire-protection-tested metal insulation support for fire-resistant insulating boards Advantages The metal insulation support achieves fire resistance F 120. This means that it can be used where there are fire resistance requirements. The DTM 80 plate for soft insulating materials (available separately) simplifies storage and minimises costs. The simple hammer installation allows fast setting, thereby reducing the amount of work. The shaft geometry allows setting in aircrete without pre-drilling, thus saving a stage of installation. The DHM is available in hot-dip galvanised steel or stainless steel A 2. The fischer metal insulation support DHM is simply hit in with a hammer. The hammer installation allows fast setting, thereby reducing the amount of work. Thanks to the fire resistance rating F 120 achieved, use is possible if there are fire resistance rating requirements. With the metal insulation support DHM you can, for example, fix mineral / glass wool, foam glass tiles and light building boards made of wood wool. Applications To fix fire-resistant soft or pressure-resistant insulating materials, such as: Mineral / glass wool Light building boards made of wood wool Foam glass tiles Also suitable for: Polystyrene boards Coir matting Building materials Concrete Hollow blocks made from lightweight concrete Vertically perforated brick Perforated sand-lime brick Solid sand-lime brick Natural stone with dense structure Aerated concrete Solid brick made from lightweight concrete Solid brick You can find detailed information on building materials in the registration document. Approvals Z-21.8-2057 EPD-FIW-20210314-CBD1-EN Functioning The insulation support is set in push-through installation using a hammer. The spring steel expands when hammered into the base material. Use the DTM 80 plate (available separately) to fix soft insulating materials. DIBt-approval Drill diameter 8 mm Anchor length 80 mm Min. drill hole depth 50 mm Packaging Folding box Amount 250 St. GTIN (EAN-Code) 4048962246940 DIBt, National German Certification pdf, 1 MB Z-21.8-2057 fischer insulation support DHM in concrete Valid from 12/04/2020 to 12/04/2025 EPD - Environmental Product Declaration pdf, 954.6 KB EPD-FIW-20210314-CBD1-EN Environmental Product Declaration for fischer Insulation fixings Valid from 02/22/2022 to 02/21/2027 Load Table pdf, 28.4 KB

• Simple Hammerset installation saves time and costs.
• The metal insulation support achieves fire resistance F 120. This means that it can be used where there are fire resistance requirements.
• The DTM 80 plate for soft insulating materials (available separately) simplifies storage and minimises costs.
• The simple hammer installation allows fast setting, thereby reducing the amount of work.
• The shaft geometry allows setting in aircrete without pre-drilling, thus saving a stage of installation.
• The DHM is available in hot-dip galvanised steel or stainless steel A 2.
• Mineral / glass wool
• Light building boards made of wood wool
• Foam glass tiles
• Polystyrene boards
• Coir matting
• Concrete
• Hollow blocks made from lightweight concrete
• Vertically perforated brick
• Perforated sand-lime brick
• Solid sand-lime brick
• Natural stone with dense structure
• Aerated concrete
• Solid brick made from lightweight concrete
• Solid brick
• Z-21.8-2057
• EPD-FIW-20210314-CBD1-EN
• The insulation support is set in push-through installation using a hammer.
• The spring steel expands when hammered into the base material.
• Use the DTM 80 plate (available separately) to fix soft insulating materials.